Quote:
Originally Posted by bret
Should not be any problem with the SPC upper arms...BUT, you will need to run the suspension through it's travel to ensure no ball joint binding, AND to determine if the camber curve, caster settings and bumpsteer are acceptable.
One of the advantages of teh SPC arm is its adjustability. One of the dangers of the SPC arm is its adjustability  |
I am in the process of doing the same. I bought a complete Ridetech Level II coilover setup and want to use my SPC uppers. My only concern about this working is the SPC uppers have a tall upper ball joint. Will this cause problems with the Ridetech spindles, which are 1.75" taller than stock spindles?