View Single Post
  #2  
Old 05-03-2006, 09:45 PM
camcojb's Avatar
camcojb camcojb is online now
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,430
Thanks: 7,453
Thanked 2,286 Times in 1,071 Posts
Default

Quote:
Originally Posted by x-tream
i am planing on building a sbc for for a 68 camaro. I am looking for a fuel injection intake that works well with a supercharger. i would prefer one that comes with the electrical and management system, just to make my life easyer. Any sugestions ??
Holley and Accel have complete systems. You will likely have to swap injectors for larger units and likely the fuel pumps; with the Holley you'll need their race update for larger injectors. I usually piece them together as the injectors and pumps are rarely big enough for a healthy blower setup.

I like the FAST and Big Stuff 3 but you'd have to buy the pieces separately. But you'll be swapping parts anyway to support the power level. Possibly a vendor can get you a nice package. I know Frank at http://www.gpsuperstore.com should be able to put a package together for you.

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote