Quote:
|
Originally Posted by XcYZ
Allen, I'll definitely do that. 
I got an e-mail from a member noting the axles in the housing. I guess I should have pointed out that I did the QL installation on a bare housing and that the axles and rotors were installed after I was done... just for taking a few pics... it gave it a more complete look.
William, here's a pic of the way I mounted the housing. I welded the standoffs with the angle iron to my table, then set the housing on the angle iron, set the -2 degree pinion angle and tacked it. It was solid and worked great. I know it's not the fanciest jig out there but it was a good solution for doing it yourself in your 2 car garage. |
Great Detail! And you just answered my question, Thanks.
By the way were the axle tubes and ends already tacked on, How did you get the brackets over the tubes? I have a 12 bolt and was thinking I may have to cut the brackets in 1/2 or the ends off and then re-weld the ends to the tubes. Any tips
???
Thanks Again
James