Quote:
Originally Posted by jr2226
Hey Brad I used a forgeline wheel that was 20x11 bs was 5.0 used a 315/35/20 works good. Rear axle is 55" flange to flange the car is on hear under project Siknss and the hole,build is,on nasty z28 under the same
|
Quote:
Originally Posted by NorCal72
I just did 18x12 6''bs on 335/18/30 and 18x8 4.75bs" 255/35/18
Rear axle 57''f 2 f. Havent gotten the wheels yet but I did a LOT of research.
|
consider the wheels are actually 12 and 13" wide respectively
so an 11" wheel with 5" back space has 7" on the front side. total width 69"
a 12" 6" 7" on the front side. total width 71"
one of your combos is not going to work being the rear end width is 2 inches different.
our car has 12 with 5" bs and a 54.5" and will need small spacer for a total width of 69 +/-
hope they both work out