When I did the dry sump oil system I had to figure out where to mount the remote oil filter. I ended up fabricating a custom bracket that mounted onto the stock hood hinge. The bracket uses the factory fasteners for mounting. This worked good... I didn't have to drill any holes on the inner fender or fire wall. The filter cleared the stock heating duct on the fire wall. I bought the billet aluminum black annodized oil filter mount from Moroso.
View from back side
__________________
"
If you wait, all that happens is you get older"
Mario Andretti
69 Camaro-Nutter Racing Engines/427CI LS2 sleeved/LS7 CNC ported heads/Custom cam/T&D 1.8 rockers/Manley crank/Manley H-beam rods/Weisco pistons/NRC Pro Series dry sump/Kooks/NA,92 octane,11.5:1- 672HP @ 6,900RPM, 566TQ @ 5,500RPM
Build Thread-
http://ls1tech.com/forums/generation...ine-build.html