Quote:
Originally Posted by GregWeld
Okay -- and I see another possible issue.... ASSUMING you're running an MSD box... since I see you've put on a GM weatherpak connector on the distributor.
The Black/Violet wire is negative (-) while the Black/Orange is postive (+). The wires that come out of the MSD are Violet(+) and Green (-). The 2-Pin connectors are designed to only connect one way so the wiring cannot be switched. If for some reason the connectors are changed, be sure the wires are connected with matching polarity. If they are not, the engine may or may not start, but if it does the timing will be inconsistent and it will run rough and not accelerate.
|
FYI Greg, that weatherpak connector is stock for MSD distributors.
