[ironworks]

Due to some pretty major family drama, Dave the owner of the car is forced to sell this project to get as much money together as possible to help with some cash that is needed for the family drama . Since most of you may not want to go back through how ever many pages to see the details. I will post up some pictures.

I will not post up the price they are looking to get as the real price really included in the cost to complete and with the level this car was built toward that can be really expensive. The car is currently semi permanently attached to a chassis table that is to wide to ship and cutting the car off the table would ruin the car. It need work just to get it off the chassis table.














We were beginning to start on the front end of the car now that the sheetmetal was now in place. The car was designed to run a 295-315 / 19" front tire and a 335/20 rear tire. It has 4.75" of ground clearance and is 47" to the roof if memory serves me correct. This car was built to raise the bar. We have tried to keep it pretty quiet, but now due to the family issues the car needs to be sold.

The car is to be sold to someone who would continue the work on the car and the level of finish can still be determined by the customer, but unless your going to make a rat rod out of it, it will still be expensive.

If your serious about something like this email me direct. [email protected]

Rodger