Been busy lately. Got sick of scrapping on the headers and rubbing the tires. So after some though I decided to just go air. Ridetech says that a car can be just as competitive on air as coils. With that being said I started looking. Well new kits are pretty expensive.. 4/5k -/+ I need to have the better of most things and this is no exception. I had a few bucks from Christmas and decided to try to find a used kit for less. Maybe something that will get me on air and then I can upgrade little by little. I found an older system that was made by Ridetech. Guy wanted 2k and after a few email with pictures to Danny over at Ridetech I purchased the whole system for 1500. Thanks for all the help Danny! The big downfall to the system is the management system is very old but I plan to upgrade to the E3 when I get some money saved up again.
While all this was going on I took advantage of MCB Ridetech deal and purchased the tru-turn. So in the past week me and some friends installed it all. The tru turn original did not clear the drives tie rod with my dynatech headers. I did some digging and Chev67 has the same exact setup. After some talking to Jason (Chev67) he let me know that I need to put a 1/4" spacer under the pedestal mounts. After that was done everything cleared fine. Big thanks to Jason.
After all this work I was motivated to get my front wheels on. After some searching I found a very nice set of 275 KDW's for the fronts. Had them mounted and balanced and slapped them on. I still need to order the 1.5 " spacers which will be done this week.. Enough talk onto some pictures..
And Daddy's little helper..
Im thinking for this spring/summer Im going to do a semi-black or flat on the outside..cheap and easy and it will look badass.. Mr. Vengeance what do you think? Wanna come up and help me?