Thread: 2nd Gen DSE Quadra Link
View Single Post
  #2  
Old 01-22-2013, 05:08 PM
coolwelder62's Avatar
coolwelder62 coolwelder62 is offline
Senior Member
  
Join Date: Aug 2005
Location: Vinland Ks.
Posts: 4,315
Thanks: 0
Thanked 3 Times in 3 Posts
Default
Check to see the pinion is centered in the housing.Measure from the axle flange (Rotor mounting surface) the pinion center.Then check axle flange to lower 4-link center bracket(side to side).
Reply With Quote