I can't get to the car till tomm. But I know that a stock 10 bolts pinion is a 1/2 inch offset to the pass side. And the bodys on 2nd gens are 1/4'' to 3/8'' off to the pass side. So tomm I'll find out exactly how far to the pass side the pinion is. If its 3/4'' that should be where the stock pinion was. I do know that the pinion is offset to the pass side on the dana 60, I just dont know how far. Hopefully it looked closer because the dana is bigger. Dont know if that makes any sense. Thanks Bill
|