Quote:
|
Originally Posted by lil427z
take some timming out at idle.
rick k
|
Autronic uses timing to handle the idle. It uses a table with the RPM on the x scale and user configurable y (TPS, MAP, LOAD...).
Now the engine is ideling 900rpm at 10degrees of timing and I do believe that this is rather low already.
I can also make adjustments to each cylinder on the timing or fuel. This is also done in a table with RPM on the x scale and user configurable y (TPS, MAP, LOAD...)
I have tried to put some more fuel (at low TPS) to the cylinders going lean and this is helping some.
When trying to add/reduce timeing on these cylinders I get no effect that I noticed.