Thanks again
I have not been here in a week or so.
Thanks for the positive words. I had to do the custom inner fenders. The subframe is installed on drop bushings from DSE. The subframe from 21st Century is their 1 inch drop version...so the whole front subframe and motor is raised almost 2 inches in the car from where the stock one was. The trans tunnel even had to be raised. The car is very low at ride ( lower control arms paralle with ground) No way was the stock inners going to work. I line-x'd inside the fenders to keep rocks from making tits on the top side of the fenders.
Just for laughs we bolted the rears on the front, 285/19/35 on a 10 inch. Fit fine with plenty of clearance.
|