Hey Bryce,
The stock frame has the same measurement from UCA mount - UCA mount(across the engine bay). So I figured the control arms should work? They are Ridetech 2" drop spindles. The car doesn't have 100% of the sitting weight, still missing a tranny and front body panels. Probably sitting 1" higher than final ride height in the front. I took the springs off and cycled the suspension through it's travel range, to see the degree of camber change or any bump steer. There was no noticable camber or bumpsteer change from top to bottom. I'll have to give the car a small roll on the ground, eliminate the possible binding on the wood stands.
thanks Bryce
__________________
68 Camaro project. Shafiroff 540 BB, M9 trutrac 3.89's, Speedtech subframe, Ridetech suspension, DSE tubs...
|