Quote:
Originally Posted by Vince@MSperfab
What master cylinder are you using and what brakes?
|
Quote:
Originally Posted by dontlifttoshift
First, the rod between the pedal and booster. Remove the pin, hold pedal up against the pedal stop or brake light switch, adjust rod until pin slides in with no preload. Leave that alone.
Is the pushrod there between the master and booster? Nothing really holds it in on those boosters, it could have fallen out.
Like above, what master are you using?
|
Im using the Detroit Speed Master and booster all in one.
there is a push rod but its not adjustable
WIlwood 2 piston set up in the front from CCP
Right stuff disc converstion for the back.
