Quote:
Originally Posted by geberhard
Awesome info thanks! If you get a chance and could take some profile (i.e. rear shots) or even a bottom up straight shot or shot of a ruler across up that woudl be a huge help! I am running Boss wheels 9.5 in the rear, but they are very much on the edge with the 275's even rolled up so a bit of room but not too much room for more drop. That is with the stock bird rear wich I believe is about .5 inch or so wider than a Camaro rear from what I heard?
Thanks again!
Gui
|
I completely forgot to take pictures, sorry. I removed the rear end this weekend so I can narrow the other setup. Will the stock size rear-end length help you any (to compare to yours)? I took a measurement to the outside of each axle flange, drum brakes and backing plates removed, and I am at 60 inches. With the 18x9 and 5.25 backspace, I would be on that edge if I had not rolled back the metal underneath. I'm actually going to see if I can cut the new rear end about 1/4" extra on each side to move the wheels in just a hair. Like I said in a previous post, with my 18x9, I had a little more room to the inside when compared to the outside. If there's any other measurements I can take for you, let me know.