Quote:
Originally Posted by DRJDVM's '69
I wasn't 100% satisfied with the exhaust Rob and I built....the tailpipe angle to the lower valance was not quite right and the tips didn't line up square..so I re-did the tailpipes to get the angle right and get allitle more clearance to the air bags..and added another v-band clamp to make the pieces smaller
 |
Not sure that is going to acomplish what you want. I may be wrong here, but you have the exhaust mount on the wrong side of the expansion joint.
if you want the tip to always stay in the same location, you want to hard mount the tip centered in the valance and have the expansion joint before it, so that the tip will always stay in place as the exhaust moves around.