Quote:
Originally Posted by intocarss
|
Yeah. Sad that it is remotely exciting.
Quote:
Originally Posted by carbuff
That picture makes the front of the pan look pretty deep. Are you going to have to raise the motor or do anything special to the subframe to clear?
Nice looking piece!
|
We mocked up a SBC on the motor mounts and measured from there clearance needed for the rack and the X member. As long as they built it to our specs we should be good. Albeit tight!
Quote:
Originally Posted by badmatt
Dave, That pan will work. box that up and send it.
|
It's going out manana.
Quote:
Originally Posted by dinos67's
after looking at your build I am going to quit while I am ahead. 
one really cool build hats off to you |
Thanks, but I am not sure how you found anything build-related in the mountain of rubbish that has become my thread.
Quote:
Originally Posted by gerno
The pan looks bad ass and the welds are sick on it but for some reason it reminds me of milking a cow.... What size lines are you running out of it and will there be any issues with the frame or headers?
|
Milking a cow. I did grow up in the midwest but I have no experience there sorry.
4 12AN lines from pump to pan, and then 16AN from pump to tank (1 supply and 2 scavenge return).
Headers may pose an issue. We may have to modify but I am hoping not. Frame should not be an issue if we measured right!