sound simple.. so the short side of the 90 (L) goes horizontal to the stud mount... got it.. then you used the suppliedes tab that mounts to the cowl?
nothing on the bottom?
would this work? take 1 inch wide 1/8 thick flat steel weld it to the cowl then drop a bracket down 90 that will bolt to were the stud would have gone through the firewall?
if so... i was thinkinging maybe some kind of locking connector on the end to make the unit come in out easy without having to unbolt...
Last edited by XLexusTech; 04-27-2013 at 05:17 AM.
|