Josh, are you still running the HPS 1-piece pads you purchased with your kit? I know you were going back and forth between those and the HP+, but didn't want the increased dust/noise/wear associated with the more aggressive pads. You basically have three ways to reduce pedal effort, increase the pedal ratio, decrease the MC bore size and/or increase the pad CoF. The pedal ratio on your Wilwood pedals is fixed at 6.25:1 and I don't know whether a 5/8" bore MC will have the necessary volume to supply the front calipers without excessive pedal travel, leaving the pads as your best option IMO.
What bore size wheel cylinders are you running? If I'm not mistaken, there are some larger bore wheel cylinders that are a direct swap which might help get your balance beam adjustment a little more centered.
Tobin
KORE3
|