It will fit.....just barely. I put a viper t56 behind my 462 and had to massage where the firewall meets the floor. I used a Mcloed bellhousing with the stock throwout bearing. The driveline angles come out pretty good. My car was an automatic with console and the shifter comes out the stock hole pretty well. It is a lot of fun. The crossmember I used was from BMR fabrications. They had to custom make it and I had to further adapt it, but that was 3 years ago, so much has changed since. good luck!
__________________
Chris
1969 Firebird: injected Pontiac 462ci, T56
Last edited by Tinker; 05-09-2013 at 06:35 PM.
|