Jake sets the pinion angle into the lower trailing arm brackets when they are welded onto the rear end. As long as your shocks are plum you will be good to go.
My TA is installed the same way Dave, I'm not sure what style mount you have but I have a bracket that bolts to the pinion support to lock the rear end in place also. I know some of his older design used the two bars that Payton mentioned running to the top of the housing. I can see the bolts sticking out of your TA in front of the rear housing.
Bryan, You have the older style. His new design is double shear like mine and Dave's. I am not sure how long ago the design changed but mine was that way originally and I welded the new tabs onto the housing before I installed it. He changed the TA mount to double shear to increase strength.
__________________
Aarik
68 Camaro 6.0/T56, Jake's Rod Shop C6 Subframe, JRS Torque Arm, Ridetech TQ Coilovers
Last edited by Hugger67RSSS; 05-10-2013 at 08:06 AM.
Reason: Added Info
|