Thread: 2 Piece Main 383 to LT1 T56 Need help Fast!
View Single Post
  #4  
Old 05-14-2013, 10:37 AM
camcojb's Avatar
camcojb camcojb is offline
Administrator
  
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,322
Thanks: 7,115
Thanked 2,179 Times in 1,004 Posts
Default
Quote:
Originally Posted by NorCal72 View Post
Thanks for the response. So the early style (2 piece) SBC and the LT1 clutch will bolt up the same to the conversion flywheel? I know it needs to be the 26 spline. Forgive my ignorance, I just don't have the experience with the manual setups.
Yes, with a conversion flywheel like the Centerforce 183-700107 They are the smaller 153 tooth ring gear so a starter swap might also be needed depending on which starter you have now.
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness
Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes
Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote