did you change the size of the cooler lines in the last change. not sure which cooler you have on the web site but if it takes threaded fittings and looks like the b&m super cooler you should be ok there, i would just run the cooler alone that way the engine heat is not a factor. check to see if one of the lines is kinked or bent you may not have good flow, there is a restriction some where. is the stall in the convertor getting higher ? i woiuld look in the inspection cover to see if its turning blue colar was the trans shifting fine before you changed the t.v cable ? you may want to see what the trans pressure is at. if all fails pull the bottem pan to see it the filter is half pluged or not in the trans all the way or pan is dented in and restricting flow to the filter. this is just a couple of things to look at good luck.
|