Need your advice guys
Hello guys
I bought my 68 camaro from a friend of mine who installed a vintage air kit,and it is an old system which has cables for controlling and stuff.
The heater and #10 &6 fittings are all pointing towards the firewall in order to be run through the heater opening
I did not like how the engine bay looked like so I decided to smooth the firewall in addition to other body work and rust repairs. I purchased an extra length hose kit to run the hoses through the kick panel opening and behind the fender.
So now with the firewall being smooth, is it possible to reroute the #10&6 fittings from the evaporator to point towards the kick panel like the newer model vintage air evaporators
__________________
72 Camaro RS:SOLD
68 Camaro:
LS6 Engine,Tremec TKO 600,5 Speed
Complete Speedtech Subframe Kit,Speedtech Torque Arm, 9" Rearend from Strange, Wilwood Brakes, Minitubbed, Hotchkis Subframe Connectors, FIKSE FM5s
Last edited by 72Z/28; 05-25-2013 at 01:10 PM.
|