well, just when I thought all was going good, BAM!!! not just yet. I put some global west spacers under the front springs because it was just sitting too low for numerous reasons. Dropped it off at my local shop to do an alignment, and he says he can't do the alignment cause the rear springs are weak and the car is sagging towards the pass side. so I get authorization from the wife to get the leaf springs and all the associated parts to do the job. just completed the job and the damn thing is still leaning to the pass side. I measured up by the back of the subframe and the pass side measurement is 5 3/8 in and the drivers side is 6 2/16 in. this is on the garage floor which seems pretty darn flat. I'm kinda lost on what to do now. don't know if my subframe is tweaked or even what to do if it is. Just don't have the cash or room to be doing that at this point. I'm VERY aggravated at this point.
