Quote:
Originally Posted by RBuhr69
I thought most units you can disconnect the hard lines and just run hose/AN fitting to them directly.....On my Gen IV, I just left off the hard lines supplied and plumbed everyhting under the fender through the heater fan blower opening and down through the kick panel straight over to the unit..
Are you lines welded directly to the unit ?
|
The lines were not welded to the unit as shown in the photo. I ordered an extra length hose kit from summit in order to run the hoses through the heater blower hole and everything to be plumbed under the fender.
The only problem is that the #10 from the unit is pointing towards the firewall, which now needs to be cut and rewelded in order to aim towards the passenger side kick panel