Quote:
Originally Posted by 65_LS1_T56
Chris, I looked for a picture without the interior panel on but must not have taken one. Here is one that shows the 1/4" thick plate that has the tapped holes to mount the bar to. I drilled clearance holes in the sheetmetal for the bolts to pass thru the 1/4" plate for full thread engagement. It is perimeter welded to the inner structure. Where I positioned it, Is where multiple layers are welded together right inline where the door striker is. The bar is rock solid, didn't think it would be as rigid as it is myself.
The mounts I used are from B&B Classics
Hope that helps. |
That'll work. Thanks for the description.