Quote:
Originally Posted by Apogee
I assume you're referring to the 1968-1976 C3 dual-9" unit? If so, then the Wilwood MC's should be compatible as they have slotted mounting holes compatible with a 3.25" to 3.40" stud spacing and the standard GM mid-size car register diameter. As for bore size, that should be a function of booster size/configuration, vacuum level, effective caliper piston area, pedal ratio and pad compound...however a ballpark bore size should be 15/16" to 1" for your application.
Tobin
KORE3
|
Here is the link to what I was thinking about buying
http://www.ebay.com.au/itm/121002726...84.m1423.l2649
I did do a search of the one you listed and found one so If this ebay one will not work ill just order that other one. I did send wilwood a email with this ebay link to see if the MC will work so I hope to hear from them very soon. Thanks Tobin for your help!
-Brian