Thread: Project, "Slider", a 1964 Grand Sport Corvette
View Single Post
  #25  
Old 06-18-2013, 02:21 AM
tyoneal's Avatar
tyoneal tyoneal is offline
Supporting Member
  
Join Date: Jun 2006
Posts: 1,365
Thanks: 0
Thanked 0 Times in 0 Posts
Default
Quote:
Originally Posted by Payton King View Post
is there no adjustment for roll center change on the watts?
The 3 link in this car has an adjustable "Roll Center" at the front end of the upper link instead of the rear. There is a 12X12 panel inside the car that comes off with dzus fasteners.

The Front of the 3 link bar has several different positions you can choose from. You can actually adjust it from inside the car.

Here's a picture of the panel where the adjustments of the upper link takes place. It is located between the two seats.

Sorry it has taken so long to answer.

Thanks,

Ty O'Neal
Attached Images
 
__________________
Project, "EnGULFed"
1964 Gulf Liveried, Corvette, "Grand Sport"
===========================
Ty O'Neal
"She Devil" aka. Betty
1969/70 Camaro SS
427 LS3, 600
Keisler Road and Track T-56
Full size 3 link and custom roll cage
315mm tires on rear, should fit the same on front. Worked to design a more effective shape.
======================
"Chester's '65"
1965 Buick Riviera
Aiming for true PT Status with
the best available from the 70's and 80's
======================
Last edited by tyoneal; 07-21-2013 at 06:33 AM.
Reply With Quote