I took some oil pressure readings but went with water temps beause I am now using the oil temp bung in the pan for the dip stick.
Initial start up cold at 1000 rpm was at 68 lbs
Temp at 180, rpm 750, oil pressure 53 lbs
Temp 190, rpm 750, oil pressure 52 lbs
Temp 200, rpm 750, oil pressure 48 lbs
Temp 205, rpm 6300 and held for a few seconds, oil pressure 62 lbs
I asked Joe why the difference in readings and he said because the dyno was running the engine through an oil cooler and it had an adjustable flow restrictor.
Needless to say I am now relieved.
__________________
Gaetano Cosentino
Last edited by Track Junky; 06-25-2013 at 12:32 PM.
|