Quote:
Originally Posted by Vince@MSperfab
i'd change that R.75 to something longer and more of a 45*. Also use misalignment bushings and drop that bolt size to .500 that way you can use more material surrounding it.
looking good.
|
Hi Vince. Good point on the 45. I was worried about shock body clearance and figured boxing in the top side would be enough but you're right. I should be able to 45 that.
On the bolt sizing.. I'm using a 1/2" grade 8 with 3/4" OD 1/2" ID bushings. one bushing gets welded to the mount and the other slides through the 3/4 hole as a press fit so there's tension on the shock bearing.