Quote:
Originally Posted by Vince@MSperfab
that looks much better.
|
I squeezed as much out of this as I could on the inside. I ended up having to go from a .75 radius to a .5 radius because the Ridetech coilover was wider at this point than the Monroe I was mocking up with. I went backwards. LOL. I'm left with .032 gap between the edge of the coilover and the bracket but the coilover swings away during travel so it should work. In addition to my plan to box in the top/back side I added more material to the top of the coilover mount hole location and changed the top from a straight line to a 3" radius. I think this should work as most of the force will be in an upward direction.