In May 2013, we moved everything to the house and took over the garage. This gave us the chance to do a final mock up of the body for paint work.
Made the garage a temp spraybooth for the epoxy primer.
After that we bought a Harbor Freight portable garage to make a spraybooth and shot the Raptor liner on the bottom of the cab:
Fast forward to current times. We have just finished the brake lines and most of the fuel lines on the frame. We farmed out the final paint work to a local guy since we are trying to get this thing done soon. We have the chassis 90% complete and finishing up the metal work on the bed. Should have the cab back this week and the bed to the painter when we go to pick up the cab. Then it will be a final assembly thrash fest to get it running and driving for the show at the end of this month.
C5 rear brakes with in hat E-brake adapted to a 12 bolt rear end:
Korbin is tapping a hole for the brake line clamps:
That about brings it up to date at this point. For a full story and build thread go here:
http://67-72chevytrucks.com/vboard/s...d.php?t=418618
Thanks for looking!