View Single Post
  #12  
Old 06-11-2006, 01:40 PM
camcojb's Avatar
camcojb camcojb is offline
Administrator
 
Join Date: Jul 2004
Location: Wilton, CA.
Posts: 13,453
Thanks: 7,574
Thanked 2,318 Times in 1,087 Posts
Default

Quote:
Originally Posted by markss28
Wilwood, They look by far better and are a bit cheaper. I am looking at a set of 12.19 cross drilled and slotted with 4 piston Dynalite Calipers on all 4 corners delivered to my door ready to install for about $2000.

Baers kit is only a 2 piston up front and 1 piston in the back.
Unfortunately the number of pistons doesn't tell the tale. The Wilwood 4 piston Dynalites are weak at best. I was VERY unhappy with mine. The standard Baer Track 1/touring combo blows it away in stopping power, and the new bigger Baer systems are even better.

Wilwood makes a nice 6 piston setup for the front which seems to work very well, but have nothing matching for the rear other than the 4 piston Dynalites, which again are not a good comparison to Baers.

Jody
__________________
Jody

PAST CAR PROJECTS

Like Lateral-G on Facebook!

Follow Lateral-G on Instagram!

SPECIAL THANKS TO:
Jacob Ehlers and Amsoil for the lubricants and degreasers for my 70 Chevelle project
Shannon at Modo Innovations for the cool billet DBW bracket
Roadster Shop for their Chevelle SPEC Chassis
Dakota Digital for their Chevelle HDX Gauge Package
Painless Performance for their wiring harness

Ron Davis Radiators for their radiator and fan assembly.
Baer Brakes for their front and rear brakes

Texas Speed and Performance for their 427 LS Stroker
American Powertrain for their ProFit Magnum T56 kit
Currie Enterprises for their 9" Third Member
Forgeline for their GF3 Wheels
McLeod Racing for their RXT street twin clutch
Ididit for their steering column
Holley for their EFI and engine parts
Lokar and Clayton Machine for their pedals and door and window handles
Morris Classic Concepts for their 3 point belts and side mirrors
Thermotec for their heat sleeve and sound deadening products
Restomod Air for their Tru Mod A/C kit
Mightymouse Solutions for their catch can
Magnaflow for their 3" exhaust system
Aeromotive for their dual Phantom fuel system
Vintage Air for their new Mid Mount LS front drive
Hydratech Braking for their hydroboost system
Borgeson for their stainless steering shaft and u joints
Eddie Motorsports for their hood and trunk hinges and misc parts
TMI Products for their seats, door panels, and dash pad
Rock Valley Antique Auto Parts for their stainless fuel tank
Reply With Quote