Quote:
Originally Posted by makoshark
You are definitely taking the correct steps in making the DSE tubs fit perfect. I wanted to go the extra mile and do just what you are doing, but decided I just didn't want to put that much effort to get that 'perfect' fit in the wheel wells. I was being a bit lazy  |
Jeremy .... thanks for talking to me Sat., never would have guessed you'd have an accent being from Mississippi
, almost got the closeout ready for the mig gun.
Used Eastwood's Internal Frame Coating on the inside area and that seemed to cover all that got in it's way (omni directional nozzle) .... I did have to tape the brass nozzle to a coat hanger wire so I could aim it and keep it from being willy nilly on the tubing. Had a pix but ImageShack would not post it correctly.
Finished the outside corner, dress and install!
Almost pulled the gun last nite .... it was late and I was trying to hold this closeout on 3 axis and weld so I called it, I'll try again tonight.