Thanks for all the suggestions. I figured out a simple solution yesterday thanks to provisions in my RideTech dropped spindles and Tobin's Kore3 hubs. Used a 6" 3/8" extension, slid it through the spindle and the staggered holes in the hub. The clearance in the hub is so small and it since it a cylinder, it is holding through the hub, not just at the outer edge. No damage to the hub tight adapters w/o and assistant.
__________________
Josh
Designing a '65 Chevelle with a StreetFighter theme, inspired by JP's II Much & Ron Schwarz's $5k Mustang
|