Quote:
Originally Posted by Lenie
Battery is in trunk and not holding a charge and alternator is charging a bit low. Was reading wire size should be larger if running to the trunk, I'm running quite a few accessories including a large stereo. Installing a flaming river big kill switch. Does anyone know what the correct wire size back to the kill switch in the trunk should be? I believe I need to change mine out.
Thanks
|
also check your alternator wiring. The wiring will be different if the alternator is controlled through your ECM.
I had the same issue with the low charge,I had to connect the sensing wire from the alternator pigtail to the battery port on the back of the alternator