Thread: Driveshaft length LT1/T-56 68 Camaro
View Single Post
  #4  
Old 06-17-2006, 10:27 PM
SIRoadrnr SIRoadrnr is offline
Junior Member
  
Join Date: May 2006
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Default
Geoff, perhaps use this a reference. When I swapped out my big block/turbo 400 in my Monte, and replaced it with a LT1/T56, I had to shorten the shaft 2". The T56 uses the same yoke as a Turbo 350, and a 1310 series Universal.
Reply With Quote