Quote:
Originally Posted by coolwelder62
If you find out that you have the wrong frame stand's, the ding's can be fixed. Build some flange & collector block off plates, then put a valve stem in the collector. Heat the dinged area to a light dull red, then fill the capped header tube with no more than about 60PSI of air pressure at first. The dent should slowly push it's way out. After it's cooled start using scotch brite to work out the discolored area. I've fixed many car and motorcycle header's this way. Just take your time and work slowly.  |
This is Bomb Making 101, but it is effective, just be careful. The heat causes an increase in psi..........so baby steps.
I know more than one motorcycle friend thats launched a plug and put a hole in a garage wall and one window.......and a couple pairs of knickers.
