View Single Post
  #61  
Old 09-07-2013, 01:08 PM
Riddler's Avatar
Riddler Riddler is offline
Senior Member
 
Join Date: Aug 2013
Posts: 113
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Spent most of the day in the garage working on the car. Today I wanted to start getting the firewall mocked up with the hydroboost and clutch master. So lets start with those.

Here's the hydroboost mockup.



I still need a few things to bolt the rod to the pedal. I'm gonna have to buy a 3/8" heim joint and then cut the stock loop off and tap the rod.

I then spent 4-5 hours mocking up the clutch master.



Here's what I've got going on under the dash (not done)


I then dropped in the steering column to see how it looked. Well once that was in I could tell the driver's seat was about 2-2.5" too far to the left. So I moved it over 2" and its much better now. No I have to make the bracket fit again with new mounting tabs and then get it powercoated once again. Opps!

Riddler
Reply With Quote