Quote:
Originally Posted by makoshark
Excellent job there Chief! Keep the pixes coming
|
Thanks Jeremy ... trying to keep everyone motivated with pictures
So, it's been raining and flooding here in NOCO for a week and the temp never got above 60 so I could not get the door skins bonded, so plan B. Fit in the passenger side mini tub and get some measurements.
Made a go no go gauge outa wood that fits snug (41 5/8") and would keep things parallel with the drivers side tub ... worked well. Fit snug inside the backseat area, up and over the shock area and half way through the trunk .... and then I took a turn or something, it's metal I can fix it!
Pictures ..... here's the mini tub clamped with the measurements, the surprise was the tub in the trunk - there is a gap of 3/4" between them
, the front was 5/8" just like the driver's side. Same drill .... flatten the flange and move it over to fit the outer wheel house flange
My go-no-go gauge fit in the trunk!
I undercut the floor at the end ... and there is a gap between the tubs.
The front of the tub ... same as drivers side 
Wasn't expecting this fer sure ....
Quick depth measurements shows the same as the drivers side
That's all for today, thanks for looking ....