Quote:
Originally Posted by Che70velle
As stated above, you'll need to change your input shaft, front plate, and bellhousing. The input shaft change out is really easy. I've got pics of this in my build thread. You'll need a micrometer set to verify preload, when reinstalling the front plate. The preload is set with shims under the bearing race inside the front plate. I did mine myself, and had about $600.00 in parts. I'll tell you however, the input shaft is usually hard to obtain. Most tranny parts dealers have to back order the part.
|
So truuu, my mechanic buddy handled that part, and well, wasn't set right and the car was very difficult to shift...had to pull, redo about two to three hours
But if you look on that link on the gmhighperformance, that company has all the pieces in stock, i think i paid around 400 +/-. But it all depends on your bellhousing situation, thats the final dim