Quote:
Originally Posted by no go nova
How are you gonna mount your shock?
|
I am sure you are seeing the lower shock mount but will mention this anyway - if you look at the second image, with the tire, on the forward, lower control arm, you should see the welded on tabs for mounting a shock at the base.
I suspect you are asking due to obvious interference with the upper A v. a coil over shock. I am going to use a strut rod that will go to one side of a rocker which will be swage tube, probably 1" in diam so clearance won't be an issue. Once I have the forward down tubes in the car, I will weld up some bracketry to mount the rocker arm I designed. I will then mount the shock vertically, off the frame, up to that rocker arm.
I am sure that is about as clear as mud
