thanks guys!
Quote:
Originally Posted by byndbad914
I suspect you are asking due to obvious interference with the upper A v. a coil over shock. I am going to use a strut rod that will go to one side of a rocker which will be swage tube, probably 1" in diam so clearance won't be an issue. Once I have the forward down tubes in the car, I will weld up some bracketry to mount the rocker arm I designed. I will then mount the shock vertically, off the frame, up to that rocker arm.
|
I went back thru as I recalled having a shot with my old Penske shocks laid in the front, here it is. Essentially I will get new Penskes and mount them roughly as shown here
hmm, not sure why it only links and doesn't just reshow the image... just click on the link then and you see the image.