Quote:
Originally Posted by Mkelcy
An LS1 T56 will bolt up just fine to a SBC/BBC with a 0.5" thick mounting/adapter plate and the original Muncie type bell housing and mechanical clutch linkage. You can skip the adapter plate if you use a hydraulic clutch linkage and a T56 specific bell housing for the SBC/BBC.
|
I've seen this done, but never in high power applications. I wouldn't run it, ever.
Back to the original question from the op, he never stated he had the adapter plate, and associated hardware. He simply wanted to know if his tranny that's currently behind a bbc, would work behind an ls3.