Thread: Adapting Ridetech Triples w/ T-bar to Chevelle stock lower a-arm
View Single Post
  #4  
Old 09-24-2013, 10:32 AM
BANKO's Avatar
BANKO BANKO is offline
Senior Member
  
Join Date: Jan 2006
Location: Palo Alto, CA
Posts: 230
Thanks: 0
Thanked 0 Times in 0 Posts
Default Worked like a charm
Drilled out the lower nuts to a 3/8 hole and used 5/16-18 x 1 1/2" bolts and lock nuts.

@ Bret: I got these directly from Ridtech when I reedeemed my
Ridetech Renegade award. No issues with assembly since I mounted them on the top side of the a-arm. I could see that they would not fit if one tried to mount them on the underside similar to the stock shock.

Looking forward to testing and tuning these sweet coilovers!
I can already tell a marked improvement over the stock shocks and 2" dropped springs I just removed.
__________________
Josh

Designing a '65 Chevelle with a StreetFighter theme, inspired by JP's II Much & Ron Schwarz's $5k Mustang
Reply With Quote