View Single Post
  #7  
Old 09-28-2013, 03:41 AM
69x22's Avatar
69x22 69x22 is offline
Senior Member
 
Join Date: Aug 2007
Posts: 609
Thanks: 0
Thanked 1 Time in 1 Post
Default

Quote:
Originally Posted by Z06vette View Post
I am...AFTER having the gears removed, putting in new ones (richmond double diamond in black box) And paying to have the new gears set up properly. I'm running moser 12 bolt with ford ends, 31 spline, wavetrac, 4.10s. Moser did send me a new gearset & install kit at no charge , but after paying over $3k for the complete setup, I paid nearly another $500 to reinstall new gears. They wanted me to remove the entire rear end, crate it up, and ship it back to them. That would be on my dime, and if was determined they were at fault, it would be fixed at no charge. That seemed ridiculouse to me, told them it would be cheaper & much less work to just buy new gears. So thats when they offered to send tme the gears & install kit. Its sucks, but its near whisper quiet now. Could have been worse, they could have just said F U, send the whole housing back or live with it. What setup are you running?
Scott
My 12 bolt came from Moser with Motive 3.55s. Those didn't make it to the end of the street without screaming at me. Moser wouldn't warrantee it because the rear sat for a year and a half while the car was being built. The next 2 sets were put in by Pyle Brothers, Hoosier 3.73s and Motive 3.73s, both were loud and got worse as time went on. The next set were used GM off Ebay (quietest so far). They had a slight whine between 45 and 50 but have gotten worse. I've never used synthetic throughout all of this.
__________________
1952 Ford F1 817 HP 8-71 Supercharged 502
1957 Chevy 454LSX
1969 Camaro 830 RWHP ProCharged LS 416
https://lateral-g.net/forums/show...ighlight=yenko
https://lateral-g.net/forums/showthread.php4?t=34171
Reply With Quote