[Steve1968LS2]

Originally Posted by Overkill

Thanks guys. I'm looking at a cooler of some sort to put in-line and possibly swapping to a smaller pump. In looking through Summit's online catalog, I have only found one that says it's for gasoline. It's a dual circuit unit ( http://store.summitracing.com/partde...5&autoview=sku ). I guess I could just tie one circuit to the other and get all six passes to cool the fuel. What would keep one that is made for a transmission or oil cooler from being used for gasoline instead? I would think that as long as it sealed it would be ok, but not sure if there is another reason for not having it listed on the Application list.


I think that it's possible to add a PWM output on the MegaSquirt controller that I am using. I'll see if I can figure out what I need to do to use it to slow a pump down, whether it is the one that I have or a smaller one that I replace it with.

Most coolers can be used for gas.. here's a new one from Barry Grant that I'm looking at. Plumb it into your return line.

http://www.barrygrant.com/news/artic...oduct_005.aspx

The other one I'm looking at is this small fanned unit from B&M.

http://www.bmracing.com/index.php?id...bcat=28&pid=75