[Overkill]

Originally Posted by Steve1968LS2

Most coolers can be used for gas.. here's a new one from Barry Grant that I'm looking at. Plumb it into your return line.

http://www.barrygrant.com/news/arti...roduct_005.aspx

The other one I'm looking at is this small fanned unit from B&M.

http://www.bmracing.com/index.php?i...ubcat=28&pid=75

Thanks Steve. I like the idea of the fan on it to help push air over the cooler.

Originally Posted by Turbo Duece

I would make sure it will withstand 50-60 psi. When you go into boost your fuel pressure goes up above 45psi.

I really don't think you will need a cooler with a controller. I have no problem with my car now.

2 bosch pumps
1 Aeromotive controller
-12 line to the fuel "Y" at the engine.
-8 return

Thanks Turbo Duece. Are the Bosch pumps in tank units or do they make external ones also?

Originally Posted by Blown353

FYI, the cooler should be installed on the *return* line and won't see more than a few PSI of pressure, whatever the backpressure is from the cooler back to the tank.

Good to know. I'll keep it in mind. Thanks.