Quote:
Originally Posted by paulk68
I am building a 68 camaro that has been mini tubbed and I have the ridetch 4 link to bolt in place. I am thinking of going with a moser 12 bolt much like the 48 hour camaro build. do i need to take specific measurements to place the order f0r the rear? or can i just tell them i need a shortened rear to fit the minitubs? I will be going with 18" wheels and Baer brakes. Also I am thinking i will be safe with 3:73 gears. I plan to run a t-56 with around 550 hp. Any help woul dbe much appreciated
Thanks
|
I put a Mosier in one for a friend recently with the Ridetech Airbar and we went with 18x12 wheels w/5.25 bs.In the 69s the brackets that you weld for the lower bars was right at the edge against housing ends,so I would try to get a measurement on a rear with at least 6" backspacing on wheels.Ridetech has some nice products.If I can find my total rearend width I will send it to you.